LEVEL MEASUREMENT SENSORS

• Application: hydrostatic level measurement of vessels and tanks & precise pressure measurement in pipes
• high accuracy and overload stability
• capacitive measurement cell without fluid
• easy set up function with pushbuttons
• defined PG position
• integrated two-wire measurement transducer 4-20mA

• Application : continuous level monitoring in metallic vessels up to 2,5m, longer rods on request, suitable for level measurement of pastes and adhesive media, two-rod version for plastic vessels available, conductivity 1µS/cm min (e.g. distilled water) & for media with homogenous conductivity
• Application example : continuous level monitoring in small vessels down to 100mm, level control in first running vessels of dosing plants & suitable for measuring the level in small vessels with overpressure
• no calibration when changing the medium because of potentiometric measurement principle
• defined PG-position
• defined empty signal
• galvanic separation between power supply and output

• Application : accurate hydrostatic level measuring in vessels and tanks & precise pressure measuring in pipes and vessels
• Application examples : pressure monitoring & measuring the tank’s content
• robust design
• piezoresistive measurement cell
• defined PG position
• integrated two-wire measuremet transmitter 4-20mA

• Application : hydrostatic level measurement in ambient with high humidity & especially capable for vessels with base and acid of CIP
• Application example : level measurement with LAR-361, linearization and evaluation with PEM-DD, (6 standard geometries, 1 geometry programmable), difference pressure measurement with 2 x LAR-361 and evaluation device PEM-DD, suitable for ambient conditions with very high humidity & absolute base and acid resistant for using in CIP-vessels
• measurement cell without any contact to atmosphere, fully closed measurement system
• no drift problems caused by condensation
• very high accuracy and long term stability
• measurement up to 130°C medium temperature
• mineral oil filling, FDA approved
• field or ex works calibration
• integrated two-wire measurement transducer 4...20mA

• Application : continuous level monitoring in metallic vessels up to 2,5m, suitable for level measurement of pastes and adhesive media, two-rod version for plastic vessels available & conductivity 1µS/cm min (e. g. distilled water)
• Application examples : continuous level monitoring in small vessels down to 200mm & level control in first running vessels of dosing plants to ensure a constant pressure
• potentiometric measurement principle
• integrated evaluation circuit with 4-20mA output signal
• defined empty signal