|
||||||||||
|
||||||||||
|
ELECTRODE |
||||||||||
| Stock No 203a | Hammer Electrodes | |||||||||
|
|
Drive-in electrode with hatchet-type Edges and surface contact electrode. The hatchet-type edges should preferably be used for softwood. This electrode must be used for the HM11 meter and must be driven into the Wood, across the grain
|
|||||||||
| Stock No 203b | Hammer Electrodes | |||||||||
|
|
Same electrode as 203a, but with steel Spikes. The steel spikes should preferably be used for hardwood.
IMPORTANT: The surface contact electrodes on the head of the hammer electrodes 203,, a and ,,b are not sturdy enough to withstand hammer or similar blows. |
|||||||||
| Stock No 203c | Hammer Electrodes | |||||||||
|
|
Drive-in electrodes with hatchet-type edges and solid hammer head, but without surface contact electrode
|
|||||||||
| Stock No 203d | Hammer Electrodes | |||||||||
|
|
Same electrode as 203c, but with steel Spikes. The steel spikes should preferably. For use with constructions materials. Instead of the surface contact electrodes, the hammer electrodes 203,,c and,, d have solid hammer heads permitting the hatchet edges or spikes to be driven into the wood over their entire length by means of a hammer.
|
|||||||||
| Stock No 203 So | Hammer Electrodes | |||||||||
|
|
Heavy-duty hammer electrode of larger dimensions for particularly hard wood such as exotic species, with hatchet-type edges and solid hammer head like 203a, but with a depth of penetration of approx 23mm.
|
|||||||||
| Stock No 200 | Universal measuring cable | |||||||||
|
|
For connecting the electrodes to the LABORATORY METERS.
|
|||||||||
| Stock No 202 | Cup Electrode | |||||||||
|
|
With friction clutch permitting adjustment of a constant pressure. For measuring bulk goods such as flour, cacao, coffee, cereals, cotton, foodstuffs, etc. The material is poured into the cup and compressed with the pad of the compression screw. As the material is compressed, it is crushed on the crusher core to ensure accurate readings. The electrode connects to the moisture meter direct, without the use of a universal measuring cable.
|
|||||||||
| Stock No 201 | Compression screw-electrode | |||||||||
|
|
With friction clutch permitting adjustment of a constant pressure. For measuring materials in sheet form such as cardboard, paper, Leather, textiles, veneers etc. with a constant contact pressure. Connects to the moisture meter by means of the universal measuring cable
|
|||||||||
| Stock No 201a | Compression screw-electrode | |||||||||
|
|
For accurate through measurements of materials Of up to 30mm in thickness. The spike is adjustable and permits moisture gradient measurements. The electrode connects to the moisture meter by means of the universal measuring cable.
|
|||||||||
| Stock No 204 | Universal electrode holder | |||||||||
|
|
Designed to accept all the interchangeable electrode heads as they are needed. To connect the holder to the moisture meter the universal measuring cable is needed.
|
|||||||||
| Stock No 209a | Stab electrode head | |||||||||
|
|
For measuring goods in sacks and bales such as excelsior, sawdust, yarn, coffee beans, cacao beans, cereals, yarn and paper waste.
|
|||||||||
| Stock No 209 BSM | Cotton electrode head | |||||||||
|
|
Especially for measuring cotton and similar products in sacks or pressed bales.
|
|||||||||
| Stock No 210 | Knife electrode head | |||||||||
|
|
For measuring paper, leather and veneers in stacks, chips in bulk, rolls or bales of textile fabrics.
|
|||||||||
| Stock No 210a | Knife electrode head | |||||||||
|
|
For measuring paper, leather and veneers in stacks, chips in bulk, rolls or bales of textile fabrics. With particularly long knife blades, especially for measurements in paper and cardboard stacks.
|
|||||||||
| Stock No 211 | Roller electrode heads | |||||||||
|
|
For measuring moving webs of materials like paper, cardboard, veneers, textiles, etc. Particularly suitable for textiles
|
|||||||||
| Stock No 211a | Roller electrode heads | |||||||||
|
|
For measuring moving webs of materials like paper, cardboard, veneers, textiles, etc. Particularly suitable for paper
|
|||||||||
| Stock No 212 | Flow electrode head | |||||||||
|
|
For
measuring hanks of yarn and single threads.
|
|||||||||
| Stock No 213 | Surface electrode head | |||||||||
|
|
For
measuring thin veneers, paper leather etc.
|
|||||||||
| Stock No 215 | Depth measuring electrode for wood | |||||||||
|
|
For measuring the internal moisture content and moisture gradient of beams, planks, ties and poles. The electrode comes with a drill permitting holes to be drilled to the required depth. Only the universal measuring cable is required for connecting the electrode to the moisture meter
|
|||||||||
| Stock No 200 Kr | Alligator clips | |||||||||
|
|
The adapter 200 d and the alligator clips permit a variety of auxiliary probes such as nails, dowel plugs of metal, etc to be connected to the moisture meter.
|
|||||||||
| Stock No 218 | Pressed bale screw-in electrode | |||||||||
|
|
For measuring the internal moisture content of mechanically compressed bales. The electrode comes with a crossbar for screwing it down to the required depth. Only the universal measuring cable is needed for connecting the electrode to the moisture meter.
|
|||||||||
| Stock No 222 | Stack electrode | |||||||||
|
|
Especially for measurements in pallet stacks with gaps of at lease 14mm. Connects to the moisture meter by means of the universal measuring cable.
|
|||||||||
| Stock No 223 | Ram electrode | |||||||||
|
|
Complete with connecting cable, for making moisture measurements at different depths in hardwood up to 135mm thick.
|
|||||||||
| Stock No 220 | Kiln measuring electrode | |||||||||
|
|
For supervising the moisture content during the drying process. Two drive-in heads with measuring points of different length for moisture gradient measurements, with two electrode connecting cords of 16 ½ ft (5m) each, are resistant to temperatures of from 40 ° C to + 250° C (-40° F to + 480° F0, resistant to oils and ozone with AB plugs.
|
|||||||||
| Stock No 301 | Compressed air penetrating point electrode | |||||||||
|
|
This electrode automates the measuring function of the hammer electrode. The electrode points can be forced into wood of any hardness over their entire length. Effortless operation by means of a foot valve frees both hands and permits measurements to be made in rapid succession. The electrode can be connected to all AQUA-BOY timber moisture meters. The required operating pressure is 6 bars. Higher pressures are relieved by the built-in relief valve and will thus cause no harm.
|
|||||||||
