|
||||||||||
|
||||||||||
|
PIEZOELECTRIC VIBRATION TRANSDUCERS |
||||||||||
| Industrial Accelerometers | ||||||||||
|
||||||||||
|
These piezoelectric vibration transducers have been designed for application under rough environmental conditions. They are dust and water protected. Their mounting base is insulated to avoid ground loops which may cause errors, particularly, close to big machinery. The cable has to be ordered separately according to the requirements of length and quality (e.g. high temperature, oil resistant, flexible metal tubing). |
||||||||||
| Technical Specifications | ||||||||||
| Output | : ICP®compat | |||||||||
| Sensitivity | : 10 - 100 mV/g | |||||||||
| Measuring range | : ± 55 - 600 g | |||||||||
| Frequency range | : 0.15 .... 26 000Hz | |||||||||
| Protection grade | : IP44,IP67 | |||||||||
|
Miniature Accelerometers |
||||||||||
|
|
||||||||||
|
|
||||||||||
|
These piezoelectric accelerometers are particularly suited for small and light test objects. Of particular advantage may also be their high resonant frequencies. Due to the piezoelectric principle with its wide dynamic range both high acceleration and lowest vibration can be measured with the same sensor. The miniature accelerometers are mounted adhesively or by an M3 base thread. |
||||||||||
| Technical Specifications | ||||||||||
| Output | : ICP®compat | |||||||||
| Sensitivity | : 10 - 100 mV/g | |||||||||
| Measuring range | : ± 60 - 6000 g | |||||||||
| Frequency range | : 0.3 .... 35 000Hz | |||||||||
| Seismic Accelerometer | ||||||||||
 |
||||||||||
| The piezoelectric accelerometers shown below are well suited for seismic measurements and the measurement of building vibration (building monitoring). Their high sensitivity is achieved -unlike other high sensitivity accelerometers- by the sensing element itself and not by internal amplification. From this results highest resolution and lowest noise. | ||||||||||
| Technical Specifications | ||||||||||
| Output | : ICP®compat | |||||||||
| Sensitivity | : 1000 - 10 000 mV/g | |||||||||
| Measuring range | : ± 0.5 - 6 g | |||||||||
| Frequency range | : 0.15 .... 4000Hz | |||||||||
| Triaxial Accelerometer | ||||||||||
 |
||||||||||
|
Triaxial accelerometers are intended for simultaneous measurement of vibration in 3 perpendicular axis. All models have a central drilling for easy screw attachment and convenient axis alignment. The miniature accelerometer KS943 is particularly suited for light objects. Model KS813B-BDG was designed for the measurement of building vibration to DIN 4150. |
||||||||||
| Technical Specifications | ||||||||||
| Output | : ICP®compat | |||||||||
| Sensitivity | : 10 - 400 mV/g | |||||||||
| Measuring range | : ± 55 - 550 g | |||||||||
| Frequency range | : 0.1 .... 19 000Hz | |||||||||
